Advertisement
INSTALLATION
2
REMOVE SHIPPING BLOCK(s) / SHIPPING BRACES
Once case is in its final location, remove shipping braces and shipping block(s) located near the heat exchanger.
All shipping blocks(s) must be removed! Make sure refrigeration tubing is attached, sealed and insulated.
Interior View of Case Bottom
(some cases have more than one shipping block)
INSTALLING REFRIGERATION COMPONENTS ON TOP OF CASE
Install condensing unit to mounting plate (located near second door, facing case from right) on top of each case
using supplied screws. Route unit's electrical wiring. Attach electrical tray and GFCI. Make sure evaporation pan is
level and plug cord into GFCI.
5-door Case Shown
P/N 3124450_A
Fasten Condensing Unit to Mounting Plate.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
Shipping Brace
Remove Shipping Brace.
Condensing Unit
Mounting Location
Electrical Tray
Refrigeration
Tubing
GFCI Receptacle for
Evaporation Pan
Evaporation Pan
Advertisement
