Table of Contents
Advertisement
1. LCD screen: Shows menus for user status and unit control
2. Input Indicator: Light indicates input signal presence (green) or absent (red)
3. Error Indicator: Light indicates red when unit is in alarmed condition
4. Up, Down, Left, Right buttons: Provides navigation/entry within LCD screen
menus
5. Back and Enter Buttons: Provides navigation within LCD screen menus
6. 2 DVB-CI Slots (Factory Option)
1.3
Rear Panel Overview
The MRD 6000 comes standard with all of the hardware back panel features shown and
listed below except where noted as a factory installed option. Option cards are available
for the MRD 6000. Examples include a Quad Input DVB-S/S2/S2X card or dual port
MPEG/IP Input/Output card. ASI is a standard input and output on all MRD 6000 units.
10
1
1. RJ45 Management Port(s)
2. Relay Output Connector
3. Digital Audio Outputs
4. 15-Pin Analog Audio Connectors (See Appendix D)
5. CVBS BNC Output
6. SDI Outputs (Five BNC provide Quad3G/3G/HD-SDI/SD-SDI)
7. Digital Video Output Connector (HDMI)
8. ASI Input and ASI Output Connectors
9. Chassis Ground
10. Optional Dual Power Supply
11. Option Card Slot #1 (factory installed)
12. Option Card Slot #2 (factory installed)
1.4
Baseband Video Outputs
Each of the six BNC ports, as seen in the figure from section 1.3, fall into one of three
categories: Primary SDI ports, Secondary SDI ports or CVBS ports.
CVBS
Page 12 (112)
MRD 6000 – User Manual
3
2
MRD6000 Chassis Back Panel
1A
1B
SDI/CVBS BNC Outputs from Back Panel
4
6
5
2
12
8
7
9
11
3
4
1
1
Advertisement
Table of Contents
