Table of Contents
Advertisement
1.1
Product Introduction
The NB200E is a single-channel encoder and streamer for cost effective audio and video
processing and transport. It supports professional encoding and IP streaming for live
encoding, uploading and playback.
1.2
Front Panel Overview
The NB200E can be controlled from the front panel using the LCD screen and buttons
that are shown below in Figure 1. A detailed description of using the front panel can
found in Section 3.
1
1. Reset Button: pressing this will reboot the NB200E.
2. LCD Screen: shows menus for user status and unit control
3. Up, Down, Left, Right, OK and Menu Buttons: provides navigation and entry
within LCD screen menus
4. Status Indicator: Light indicates input signal presence (green) or absent (red)
5. Error Indicator: Light indicates red when unit is in alarmed condition
6. Up, Down, Left, Right buttons: Provides navigation/entry within LCD screen
menus
7. USB Port: purposed for storage while using the record and playback features.
Note: the NB200E is only compatible with the FAT32 USB/SD format.
1.3
Rear Panel Overview
The NB200E comes standard with all of the hardware back panel features shown and
listed below except where noted as an NB200E-01 exclusive option. Refer to the Figure
2 at the top of the next page.
Page 9 (69)
NB200E - Impulse – User Manual
2
Figure 1: NB200E Unit Front Panel
4
3
4
Advertisement
Table of Contents
