Adjusting Meat Drawer Temperature; Adjusting The Refrigerator Shelves; Removing Crisper, Meat Drawer And Cover - Whirlpool ED22PR Use & Care Manual

Adjusting meat drawer temperature...
Cold air flows against the meat drawer through
an opening between the freezer and the refrigera-
tor. This helps keep the meat drawer colder than
the rest of the refrigerator.
Set the control to let more or less cold air through.
4
USE CONTROL TO ADJUST
MEAT DRAWER TEMPERATURES
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use To remove glass shelves:
your refrigerator. Glass shelves are strong enough
1.
Tilt up at front.
2. Lift up at back.
GLASS SHELVES ARE
3. Pull shelf straight out.
HEAVY. BE CAREFUL.
To replace glass shelves:
1.
Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into
Slot.
Lower front of shelf to level position.
Removing the crisper, meat drawer and cover...
To remove the crisper and meat drawer:
1.
Slidecrisperand meatdrawerstraightouttothe
stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace in reverse order.
To remove the covers:
l
Covers are held in place by two pegs at the
back and two notched tabs in front.
1.
Press front tabs out of the way.
2. Lift cover front.
3. Lift back off the pegs.
4. Replace in reverse order.
Removing the freezer bin...
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
To remove the bin:
1.
Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the bin:
1.
Place bin on the slides.
2. Make sure the wire stops clear the front of the
slides.
3. Slide bin in.
PUSH THE TAB
TO CLEAR THE COVER.
SNAP BACK INTO PLACE
PULL OUT TO THE STOP,
THEN PULL AGAIN.
6