Removing Freezer Shelves; Removing The Freezer Btn; Removtng The Base Grille; Covers - Whirlpool ED22MM Use & Care Manual

Removing freezer shelves.. .
l
Lift front slrghtly
I
l
Lift back off supports
l
Replace In reverse order
Lltt the Front
Then the Back
Removing the crisper, meat pan
and covers.. .
l
Slide crisper and meat pan strarght out to stop
l
Lift the front
0 Slide the rest of the way out
l
Replace In reverse order
l
Covers are held In place by two pegs at the back
and two notched tabs In front
Removing freezer bin.. .
For proper air movement, keep the freezer brn In
place when the refrigerator is operatrng.
,,
To remove the bln:
l
Slide out to the stop.
l
Lift the front to clear the stop.
l
Slide out the rest of the way.
To replace the bln:
l
Place brn on the slrdes
l
Make sure the stops clear
the front of the slides.
l
Slide bin In
Removing the base grille...
l
Open the doors
I 1 I
l
Pull grtlle outwards as shown
l
Do not remove Tech sheet fastened behind grille
To replace:
Support Tabs
l
Line up grille support tabs with metal clips
l
Push firmly to snap into place
l
Close the doors
Push the lab
to Clear the Cover.
Snap Back into Place.
- Press front tabs out of the way
- Lrft cover front
- Lrft back off the pegs
- Replace in reverse order
Changing light bulbs...
Before removing a lrght shreld for cleanrng or for
replacing a bulb. unplug the refrlgerator. Use opt
phonce bulbs on/y
F lull Ott the DIoI.
Pull Out at the Botto
Light bulbs behlnd refrlgerator and treezer
control consoles:
- Pull control knob strarght off
- Pull bottom of control panel strarght out
- Lifl top of panel off supports
- Replace wrth a 40.watt applrance bulb
- Replace panel In reverse order
l
light bulb behlnd Ice maker:
~ Remove the Ice brn (see Ice maker InstructIons
page6 1
- Replace with a 40.watt
appliance
bulb
~ Replace Ice brn
l
light bulb above crisper:
- Pull top of the light shreld away from the back
wall
- Lrft shield off
base
supports
- Replace with a do-watt applrance bulb
- Replace shield In reverse order
l
Dlspenser Ilght:
- Reach the bulb through the drspenser
area
~ Replace with a heavy-duty lo-watt bulb