Technical Support - Oracle 3.2 TB NVMe User Manual

Contacting Technical Support
Caution -
slot on the servers front panel labeled NVMe (with SFF-8639 disk backplane and connector)
that is capable of supporting the Oracle 3.2 TB NVMe SSD. Never insert an NVMe storage
drive into a non-NVMe capable slot (HDD).
7. For hot plug service actions, configure the NVMe storage drive and verify drive
availability.
Follow the servers service manual instructions for NVMe storage drive configuration and
■
identification.
Use appropriate software commands to return the system to an operational state:
■
■
■
■
■
Related Information
"Servicing the NVMe Drive Using Oracle Hardware Management Pack" on page 43
■
"Product Overview" on page 9
■

Technical Support

For assistance installing, configuring, or running the Oracle 3.2 TB NVMe SSD, contact My
Oracle Support (MOS).
Related Information
"Contacting Technical Support" on page 40
■
"Product Overview" on page 9
■
Contacting Technical Support
For assistance installing, configuring, or running the Oracle 3.2 TB NVMe SSD, contact My
Oracle Support (MOS).
Please have your CSI Customer Support ID ready.
Before You Begin
40 Oracle 3.2 TB NVMe SSD User Guide • July 2016
Possible component damage. While using a 2.5-inch form factor drive, locate a server
Power on the NVMe storage drive as required.
Attach a device driver as required.
Re-activate mirror if manual intervention is required.
Re-sync mirror if manual intervention is required.