Whirlpool TER56W2B Use And Care Manual page 37

3. Pull the surface unit straight away from
the receptacle.
4. Lift out the reflector bowl. See 'Cleaning
chart" on page 39 for cleaning
instructions.
Replacing
1. Make sure all surface units are off and
cool before replacing surface units and
reflector bowls.
2. Line up openings in the reflector bowl
with the surface unit receptacle and the
element hold-down clip.
3. Hold the surface unit as level as possible
with the terminal just started into the
receptacle. Push the surface unit terminal
into the receptacle.
37