Whirlpool TER56W2B Use And Care Manual page 33

3. Set the cycle.
To start cleaning immediately:
Set both the Oven Selector and Oven
Temperature Control Knob to CLEAN.
A 3-hour Self-Cleaning cycle will be set
automatically. "C3:OO" with the colon
flashing will show in the display and the
Clean Time Indicator Light will come on.
If a cleaning cycle other than 3 hours
is desired, use the Hour and Minute
pads to set the desired cleaning time.
Push the "up" or "down" pad(s) until a
time between 2-4 hours shows in the
display.
l
Use 2 hours for light soil.
l
Use 3-4 hours for moderate to heavy
soil.
Push the Start/Enter pad. The Clean
Time Indicator Light will stay on to show
that the oven is programmed for the Self-
Cleaning cycle.
Skip to Step 4 if you want the Self-
Cleaning cycle to start now.
To delay the start using Stop Time:
Set both the Oven Selector and Oven
Temperature Control Knob to CLEAN.
Push the Stop Time pad. The Clean Time
Indicator Light will flash and the Stop
Time Indicator Light will light up. Use the
Hour and Minute pads to set the desired
stop time. Push the "up" or "down" pad(s)
until the correct time shows in the display.
The oven will automatically compute the
delay start time by subtracting the set
cleaning time from the set stop time.