Setting The Controls - Whirlpool SF380PEW Use And Care Manual

Setting the controls
To start cleaning immediately:
1. Make sure the clock is set to
the correct time of day.
(See "Setting the clock" on page 14.)
2. Move the Lock Lever all the way
to the right -the Clean position.
3. Press the Self-Clean button.
A 3-hour Self-Cleaning cycle will be set
automatically.
PRESS
YOU SEE
NOTE:
If the Self-Clean button is pressed
when the door is not latched, "door" will
appear on the large display. Move the
Lock Lever all
the way
to the right to latch
the door. If any other command button is
pressed when the door is latched, "door"
will appear on the large display and you
will be unable to continue. Move the Lock
Lever back to the left to unlatch the door
after the LOCK Indicator Light goes off.
To delay the start:
1. Make sure the clock is set to
the correct time of day.
(See "Setting the clock" on page 14.)
2. Move the Lock Lever all the way
to the right -the Clean position.
28