The Electronic Oven Controls - Whirlpool SF385PEW Use And Care Manual

The electronic oven controls
There are three parts in the oven control section:
-The digital display.
-The command buttons.
-The Set Knob.
Instructions for each oven control are covered on
the following pages. Read them carefully.
When you first plug in the range, the time
display will flash until you set a new time. If, after
you set the clock (page 8) the time display
flashes, your electricity was off for a while. Reset
the clock.
Digital display/clock
When you are not using the oven, this is an
accurate digital clock. When using the oven or
Minute Timer, the display will show the time,
temperature settings and what command buttons
have been pressed.
When showing the time of day, the display will
show the hour and minutes.
When using the Minute Timer, the display
shows minutes and seconds in the following
sequence:
For settings from 0 minutes to 1 minute 55
seconds, the display will increase in 5second
increments.
For settings from 2 minutes to 9 minutes 50
seconds, the display will increase in 1 O-second
increments.
For settings from 1 O-59 minutes, the display
will increase in 1 -minute increments.
For settings from 1 hour to 1 hour 55 minutes,
the display will increase in 5-minute increments.
For settings from 2 hours to 9 hours 50
minutes, the display will increase in 1 O-minute
increments.
When using Bake Time, the display shows hour
and minutes.
Command buttons
The command buttons tell the oven what to do
and in what order. A few examples:
-Time Of Day tells the oven you are going to set
the clock.
-Oven Off tells the oven to turn off.
Each command button (except Oven Off) has its
own indicator. The indicator comes on when you
touch the command buttons.
Set Knob
Once you've pushed a command button to tell the
oven what you want it to do, you'll use the Set
Knob to set a temperature or time. Turning the
Set Knob clockwise increases the number on the
display. Turning the Set Knob counterclockwise
decreases the number on the display.