Advertisement
Quick Links
Advertisement
Related Manuals for NCR P Series
Summary of Contents for NCR P Series
- Page 1 KIT INSTRUCTIONS P–Series Stand Mount Scanner with Magnet Release 1.0 7761-K329 Issue A...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
-
Page 3: Revision Record
Revision Record Issue Date Remarks Jan 2017 First Issue... - Page 4 P–Series Stand Mount Scanner with Magnet Introduction This kit provides a P–Series Stand Mount Scanner with magnet for the NCR P1535 POS. This kit is also compatible with the NCR P1235 POS.
-
Page 5: Installation Procedure
P–Series Stand Mount Scanner with Magnet Installation Procedure 1. Pivot the display back. 2. Remove the Upper Stand Cover by pivoting it away from the stand. The cover has a simple snap fit connection at the top. - Page 6 P–Series Stand Mount Scanner with Magnet 3. Open the CableLock™ Cover (Captive Thumbscrew). 4. The Imager can be positioned to the side or to the back of the stand. Route the USB Cable up through the stand and mount the assembly in the desired position.
- Page 7 P–Series Stand Mount Scanner with Magnet 5. Loosen the screw on the Terminal Cable Cover. To open, press on the indentations in the Cable Cover to unlatch the cover and then pivot the cover open.
- Page 8 P–Series Stand Mount Scanner with Magnet 6. Route the cable up through the P-Series Stand and connect it to any available USB Port. Close and secure the CableLock™ Cover. 7. Re-install the Upper Stand Cover. 8. Close and secure the Cable Cover.
Need help?
Do you have a question about the P Series and is the answer not in the manual?
Questions and answers