Huawei UPS5000-S Series Quick Manual page 7

Initial Startup
a. During the initial startup, set the language, time and date, network parameters, and system
parameters on the Settings Wizard screen.
b. After you set parameters on the Settings Wizard screen, the MDU displays the Bypass mode
and No battery alarms, which do not need to be handled. If there is any other alarm, you need to
rectify the fault.
c. View the system running diagram on the MDU to check that the UPS is working in bypass mode.
d. Start the inverter on the app.
NOTE
•
The Service Expert app can be downloaded from Google Play and can run on Android.
•
The port number is 443 by default and can be modified. If the UPS is managed using the app,
the port number must be set to 443.
7