Table of Contents
Advertisement
The oven light
To turn the light on,
use the Oven Light
Switch on the control panel.
Electrical Shock and
Personal Injury Hazard
l
Make sure oven and light bulb are cool
and power to the range has been
turned off before replacing the light
bulb. Failure to do so could result in
electrical shock or burns.
@The bulb cover must be in place when
using the oven. The cover protects the
bulb from breaking, and from high oven
temperatures.
Because bulb cover is
made of glass, be careful not to drop it.
Broken glass could cause injury.
To replace the oven light:
1. Disconnect
appliance at the main power
supply.
2.
Remove
the glass bulb cover in the back
of the oven by screwing it out counter-
clockwise.
3.
Remove
the light bulb from its socket.
Replace
the bulb with a 40-watt appli-
ance bulb.
4. Replace
the bulb cover by screwing it in
clockwise.
Reconnect
appliance at the
main power supply.
NOTE:
To prolong bulb life, leave the oven
light off during the Self-Cleaning
cycle.
34
Advertisement
Table of Contents
