Braeburn BlueLink 7500 Setup Manual page 4

2.3
On the powered control module, press and
hold the CONNECT button for 3 seconds
(see Figure 2).
2.4
The control module will enter pairing mode
for 60 seconds. During this time the blue
COMM indicator on the control module will
flash once every 2 seconds.
2.5
Once successfully paired, the
stop flashing and the blue COMM indicator
on the control module will turn on.
2.6
Press RETURN on the thermostat at any time to exit.
NOTE: If pairing was unsuccessful, try moving the thermostat or repositioning the
control module.
symbol will
Connect
Button
PWR COMM
Figure 2