APCI-3003
b) Sequence mode with delay
Sequence mode with delay - example 1
The interrupt occurs after the second sequence (10 acquisitions) and the
acquisition is stopped. The total delay time from the start of one sequence to the
next one is 100 µs.
dw_NbrOfChannel
dw_SequenceChannelArray = 0, 1, 2, 3, 4
b_DelayTimeMode
b_DelayTimeUnit;
dw_DelayTime
dw_SequenceCounter
dw_InterruptSequenceCounter= 2
Sequence mode with delay – example 2
The delay time after the end of one sequence to the start of the next sequence ist in
this example 20 µs.
dw_NbrOfChannel
dw_SequenceChannelArray = 0, 1, 2, 3, 4
b_DelayTimeMode
b_DelayTimeUnit;
dw_DelayTime
dw_SequenceCounter
dw_InterruptSequenceCounter= 2
= 5
= ADDIDATAG_DELAY_MODE1_USED
= 1(µs)
= 100
= 2
= 5
= ADDIDATAG_DELAY_MODE2_USED
= 1(µs)
= 20
= 2
Functions of the board
37
Need help?
Do you have a question about the APCI-3003 and is the answer not in the manual?