Axis A20 Owner's Manual page 78

Service Engine (One or
more sensors in the engine
has caused a default code,
indicating an issue that requires attention
from an authorized Axis dealer. See also the
engine owner's manual.)
Shallow Water (The boat
has moved into water more
shallow than the depth
finder determines is safe
for operation to avoid damage to the hull.
Return to deeper water.)
Surf Gate Locked (This
notice appears when the
Surf Gates are locked in
position. See additional
detail in this owner's manual about Surf
Gate operation.)
Transmission Over
Temperature (The sensor
has determined that
the transmission fluid
temperature exceeds the required level for
operation. See the engine owner's manual
for additional information.)
Wedge Down (The
Auto-Set Wedge is fully
deployed.)
Wedge Drag (The wedge
drag alarm occurs when
the boat is above 10 mph
and the wedge is between
Stow and Wedge 6.
Alarms
When alarms sound, the Surf Gate is locked
out from operation. The lockout can be
cleared by correcting the error and pressing
the ENTER button.
Surf Gate Retract
Left or Right: The
Surf Gate activator
had a failure when
trying to retract.
Axis
Owners
Manual
2019
Page 69
Surf Gate Extend
Left or Right: Over
current alarm when
the gate is trying to
extend.
Surf Gate Switch
Left or Right: The
Surf Gate sensor
has failed. See your
authorized Axis
dealer for correction.
Surf Gate General Error: An
error other than the others
listed in this section has
occurred. Most likely, the boat
will require correction by an
authorized Axis dealer.
Surf Gate High Speed: This
alarm sounds when the boat's
speed exceeds 13.6 mph with
the Surf Gate extended.