Axis A20 Owner's Manual page 202

ISSUE:
Brakes perform poorly, beyond the intermittent issue mentioned above.
CONSIDER:
• The brake shoes or disc pads may be worn beyond acceptable use.
• Corrosion/rust is preventing the brakes from operating as designed.
• Verify that there is a sufficient amount of brake fluid in the reservoir. Re-bleed as necessary.
• Verify that the brake lines are not damaged.
• The master cylinder may be malfunctioning.
• Adjust the "gain" control on the in-cab controller.
• Verify that the electrical wire connections are connected.
ISSUE:
A single brake is overheating.
CONSIDER:
• The trailer may have been stored with the actuator compressed and rust is in the system.
• A brake line may have been pinched, broken or damaged and is inhibiting or preventing brake
fluid from circulating.
• There are several other potential causes for this problem. Due to the technical nature of the
potential causes, it is best to have the system checked by an authorized Malibu (Axis) Trailer
trained service technician.
boat, as well as to other people and vehicles on the road at the time.
Axis
Owners
Manual
2019
Page 191
NEVER tow a trailer with faulty brakes. Whether the brakes are
grabbing or failing to respond, the result is usually a loss of control of
the entire rig. This situation can result in serious injury or death to
persons on-board, and damage to the tow vehicle and/or trailer and