Setting Up Wireless Bolt Iot With Rest Commands - HMS Networks Anybus Wireless Bolt IoT AWB1000 User Manual

Configuration Examples
6.3

Setting Up Wireless Bolt IoT with REST Commands

Sending REST commands to Wireless Bolt IoT:
1. Setup Wireless Bolt IoT as an internet router.
Refer to
On your PC:
2. Open a web browser and send a string by entering it in the In the Address bar.
In your PLC application:
3. Send a text string to the TCP port 80 on the Wireless Bolt IoT Ethernet interface.
For more information, refer to the REST Commands Reference Guide at
www.anybus.com/support.
® ™
Anybus Wireless Bolt IoT User Manual
Setting Up Wireless Bolt IoT as an Internet Router, p. 23
26 (40)
SCM-1202-139 1.0 en-US