HMS Networks Anybus Wireless Bolt IoT AWB1000 User Manual page 23

Configuration
Manual APN Assignment
You can set the APN Assignment manually.
Ensure that you have the APN supplied by your carrier available.
Fig. 15 APN example
1. Enter the APN in the APN field.
APN Authentication
By default, APN Authentication is set to No.
APN Authentication is to be configured only if your carrier has setup APN (Access Point Name) with user
name and password.
Ensure that you have the APN user name and password supplied by your carrier available.
Fig. 16
To activate APN Authentication:
1. Set the APN Authentication setting to Yes (PAP).
2. In the User field, enter a user name.
3. In the Password field, enter a password.
4. In the left sidebar menu, click Save and Reboot.
→ Wireless Bolt IoT automatically reboots for the settings to take effect.
® ™
Anybus Wireless Bolt IoT User Manual
21 (40)
SCM-1202-139 1.0 en-US