HMS Networks Anybus Wireless Bolt IoT AWB1000 User Manual page 26

Configuration Examples
6. Configure the Ethernet Settings, IP address and internal DHCP server settings.
7. Verify that the APN Settings are correct. You can adjust the settings manually.
8. In the left sidebar menu, click Save and Reboot.
→ Wireless Bolt IoT automatically reboots for the settings to take effect
9. On the System Overview page, verify that the cellular Data Connection has status Yes.
Result
Wireless Bolt IoT should now be connected to internet.
Depending on the mobile network operator and network type, it can take up to 10 minutes the first time
Wireless Bolt IoT is connecting to internet.
Verify that Wireless Bolt IoT is connected to internet, by sending a ping to Google Public DNS.
1. On the Diagnostics page, select the Ping method.
2. In the Target field, enter the IP address 8.8.8.8.
3. To Perform Action, click Start.
→ The ping request is sent.
→ When the ping response return, a message appears.
Fig. 19 Example, Ping response message from Target 8.8.8.8
® ™
Anybus Wireless Bolt IoT User Manual
24 (40)
SCM-1202-139 1.0 en-US