Hitachi HSC-2100 Hardware Manual page 136

⑦ Choose [Online(N)] from the [Build(B)] pulldown menu.
The personal computer will then become online with the S10/4α controller.
⑧ Choose [Receive(R)] from the [Build(B)] pulldown menu.
This starts a process of uploading the existing ladder program from the S10/4α controller.
⑨ The receive-area selection window as shown below appears.
Select the desired receive-area meeting your needs and click the [OK] button.
(If you want to receive only the ladder chart, select [Sequence and program(P)].)
5 MAKING USE OF MODULES
Choose [Online(N)] from [Build(B)]
pulldown menu.
Choose [Receive(R)] from [Build(B)]
pulldown menu.
Buttons to select one of the following receive-areas:
• Sequence and program -- ladder chart area only
• Sequence and data -- ladder chart area and DW
registers
• Sequence and fence -- entire ladder memory and
DW registers
• Sequence and work -- entire ladder memory and
DW and FW registers
• All -- entire ladder memory and entire I/O memory
(As an example, select "Sequence and data" and
click [OK].)
5-35