Controllers' I/O Modules And Hsc-2100 I/O Modules - Hitachi HSC-2100 Hardware Manual

Table 1-1 Model Number Correspondence Between S10/2α and S10/4α
(Continued from preceding page)
No. Product name
27 AI, 8 channels, voltage input of ±10 VDC
28 AI, 8 channels, voltage input of ±5 VDC
29 AO, 4 channels, voltage output of ±5 VDC
30 AO, 4 channels, current output of 4 to 20
mA DC
31 AO, 8 channels, voltage output of ±10 VDC LWA100
32 AO, 8 channels, voltage output of ±5 VDC
33 AO, 8 channels, current output of 4 to 20
mA DC
34 Power supply, input 100 VAC,
output 12 VDC / 3.5 A, 5 VDC / 0.8 A
35 Power supply, input 100 VAC or 100/110
VDC, output 12 VDC / 3.5 A, 5 VDC / 2.0
A
36 Power supply, input 100 to 110 VDC,
output 12 VDC / 3.5 A, 5 VDC / 0.8 A
37 Remote I/O station
38 Mount base 8-slot I/O unit
39 4-slot I/O unit
40 2-slot I/O unit
41 8-slot expansion unit as a
replacement unit for S10/4α
controllers
42 4-slot expansion unit as a
replacement unit for S10/4α
controllers

Controllers' I/O Modules and HSC-2100 I/O Modules (2/2)

HSC-2000
product model
LWA000
LWA001
PAN300B
PAN301B
LWA101
LWA110
LWV050
LWV060
LWV150
LWS010
HSC-2008
HSC-2004
HSC-2002
HPC-1128
HPC-1124
1 GENERAL INFORMATION
HSC-2100
product model
LWA500 ① Dielectric strength is
1,500 VAC in the
HSC-2000 AI module
models and 500 VAC
in the HSC-2100 AI
module models.
② The number of scanned
channels that can be
varied by setting in the
HSC-2000 AI module
LWA501
models is fixed at 8 in
the HSC-2100 AI
module models.
③ The input impedance at
power-on time is 5 MΩ
in the HSC-2000 AI
module models and 1
MΩ in the HSC-2100
AI module models.
LWA450 Dielectric strength is 1,500
VAC in the HSC-2000 AI
LWA460
module models and 500
VAC in the HSC-2100 AI
LWA550
module models.
LWA551
LWA560
LWV450 None
LWV460 None
LWV550 None
LWS410 None
HSC-2108 None
HSC-2104 None
HSC-2102 None
HSC-2128 Some of the modules
mounted in S10/4α
controllers' CPU units are
not mountable in these
HSC-2124
expansion units. (For
details, see Subsection
2.3.2, "Expansion mount
bases.")
1-7
Difference in
specifications
Remarks