Table 2-8 Parts Of The Model Hsc-2128 Expansion Mount Base (Shown As Representative) - Hitachi HSC-2100 Hardware Manual

Table 2-8 Parts of the Model HSC-2128 Expansion Mount Base
No. Part name
1 PS slot
2 CPU slots
3 EXT slot
4 I/O slots
5 FG terminal
Never mount a module other than the above listed modules on the mount base.
Disregarding this rule may result in malfunction.
2 SPECIFICATIONS OF INDIVIDUAL MODULES
(Shown as Representative) and Their Use
Is used to mount a power supply module (model LWV460) on the
mount base.
Are used to mount a CPU module (model LQP000) on the mount
base.
Is used to mount an inter-CPU link module (model LQE550) on
the mount base.
Each is used to mount an I/O module on the mount base.
Is wired to the frame ground (FG) terminal of each module among
those modules that have an FG terminal.
NOTICE
Use
2-7