Oneida Air Systems Dust Deputy D.I.Y. Manual page 9

Assembly Instructions (Cont.)
If you did not purchase the DIY Plus (#AXD001004HE),
5
continue to step 6.
Attach one Elbow (E) to the top outlet of the Cyclone (A)
and affix Hose (D) to the tapered end of the Elbow. Attach
the other open end of Hose (D) to the second Elbow (E)
and attach to the inlet of your wet dry vacuum.
Connect the Cyclone's (A) inlet (sideways facing port)
to your dust producing tool with your vacuum's hose or
ductwork [FIG. 5a].
Note: If your vacuum hose is not tight on the inlet or it keeps
pulling off use the Clamp Band (F) and/or the two O-Rings
(G) [FIG. 5b] [FIG. c].
To wet/dry vacuum
To Tool
D
A
E
FIG. 5a
F G
FIG. 5b FIG. 5c
oneida-air.com 9