1. Manuals
  2. Brands
  3. Oneida Air Systems Manuals
  4. Water Filtration Systems
  5. Dust Deputy Low-Pro Plus AXD259911
  6. Start-up

Oneida Air Systems Dust Deputy Low-Pro Plus AXD259911 Start-Up

Lid separator
Hide thumbs
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Rev: C 20240105LL
Patents:
www.oneida-air.com/patents
Start-Up Information
Read the Safety PRacticeS, inStallation and maintenance inStRuctionS, and youR wet/dRy
Ÿ
vacuum'S owneR'S manual befoRe aSSembling and uSing the duSt dePuty.
1.
DO NOT use to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
2.
DO NOT collect flammable or combustible liquids, gases, or explosive dusts, such as gasoline or other fuels, lighter fluid, cleaners, oil-based paints, natural gas,
hydrogen, coal dust, magnesium dust, grain dust, aluminum dust, sugar dust, flour dust or gun powder.
3.
Can be used for collecting non-flammable liquids.
4.
DO NOT use or store near hazardous materials.
5.
DO NOT operate in areas where explosion risks are high. Areas of high risk include, but are not limited to, areas near pilot lights, open flames, or other ignition
sources.
6.
ALWAYS wear a NIOSH approved respirator when emptying dust bins and during operation. Dust created by machinery operations may cause cancer, birth defects,
or long-term respiratory damage. Be aware of dust hazards associated with each work piece material.
7.
NEVER introduce sparks or sources of ignition.
8.
ENSURE all equipment and connections are electrically grounded.
9.
ONLY operate in locations that has a fire extinguisher available nearby.
10.
ALWAYS dispose of waste in a fire safe area after each use. NEVER leave wood dust in a building or vehicle. Wood dust mixtures are highly flammable and can be
explosive.
Some duStS aRe highly flammable oR exPloSive. leaRn/ know what you aRe dealing with. follow
Ÿ
all local, State, fedeRal & nfPa codeS and guidelineS.
Dimensions
Nominal dimensions shown. Dimensions subject to slight variations in manufacturing.
12-3/8"
315 mm
Appearance may vary slightly
5-1/16"
129 mm
Dust Deputy Low-Pro
3-13/16"
98 mm
As installed on a
5 Gallons
19 Liters
Bucket
Doc. # ZBM000053
English
Lid Separator
Plus
# AXD259911
18-1/2"
470 mm
™

Advertisement

Table of Contents
loading

Related Manuals for Oneida Air Systems Dust Deputy Low-Pro Plus AXD259911

Summary of Contents for Oneida Air Systems Dust Deputy Low-Pro Plus AXD259911

  • Page 1 Rev: C 20240105LL Doc. # ZBM000053 English Dust Deputy Low-Pro ™ Lid Separator Plus # AXD259911 Patents: www.oneida-air.com/patents Appearance may vary slightly Start-Up Information Read the Safety PRacticeS, inStallation and maintenance inStRuctionS, and youR wet/dRy Ÿ vacuum’S owneR’S manual befoRe aSSembling and uSing the duSt dePuty. DO NOT use to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

  • Page 2: System Contents

    System Contents Assembly Instructions 1. Apply the 5/8" Gasket (B) onto the Lid Part number Part description Separator (A) along the underside of the rim's circumference [FIG. 1a & 1b]. SDL250000 Lid Separator RGZ000005 5/8 x 40" Gasket Note: The Gasket ends should firmly butt up AHX000035 Latch Hardware Pack against each other to avoid air leaks [FIG.
  • Page 3 Assembly Instructions Assembly Instructions 3. Simultaneously pull the Latches (C3) outward 5. Review [FIG. 5] for common air leak points. and snap the Low-Pro assembly firmly down onto To empty your bucket, lift up on the Latches (C3) your bucket so that the gasket is compressed. and lift up the Low-Pro Assembly.

  • Page 4: Troubleshooting

    For full warranty terms and conditions please visit oneida-air.com/warranty. Oneida Air Systems warrants this product for a period of 1 Year, to the original purchaser from the date of purchase unless otherwise specified. Purchaser is responsible for returning warranty items to Oneida Air Systems at their expense. All parts must be returned with an Oneida Air Systems provided Returned Material Authorization Number (RMA#).
  • Page 5 Rev: C 20240105LL Doc. # ZBM000053 Spanish Dust Deputy Low-Pro ™ Tapa Separadora Plus # AXD259911 Patentes : www.oneida-air.com/patents La apariencia puede variar ligeramente Información de Inicio lea laS PRÁcticaS de SeguRidad, inStRuccioneS de inStalaciÓn y mantenimiento, y lea Su manual Ÿ...

  • Page 6: Instrucciones De Ensamblaje

    Contenidos del Sistema Instrucciones de Ensamblaje 1. Aplique la empaquetadora de 5/8 (B) en la tapa Part number Part description separadora (A) a lo largo del borde inferior como se muestra en [FIG. 1a & 1b]. SDL250000 Tapa separadora Nota: La Empaquetadora debe estar firmemente sellada RGZ000005 5/8 x 40"...
  • Page 7 Instrucciones de Ensamblaje Assembly Instructions 3. Simultáneamente, tire de los pestillos (C3) hacia afuera 5. Revise [FIG. 5] para puntos comunes de fuga de aire. y encaje firmemente el conjunto Low-Pro en su balde Para vaciar su balde, levante los pestillos (C3) y levante para que la junta quede comprimida.
  • Page 8 El comprador es responsable de devolver los artículos en garantía a Oneida Air Systems a su costa. Todas partes deben devolverse con un Número de Autorización de Devolución de Material (RMA#) proporcionado por Oneida Air Systems.

  • Page 9: Additional Troubleshooting

    Rev: B 20240103LL Doc. #ZBI000072 Additional Troubleshooting There must be NO air leaks. An air leak will cause dust to The Dust Deputy Low-Pro pre-separates up to 99.9% bypass the lid separator, leading to a clogged filter, and the of dust and debris. Our team conducted a stress test and finest particles will pass through first.
  • Page 10 If your Dust Deputy Low-Pro’s latches are the older Plug rubber-wire hold down style, rather than the new molded plastic style, please contact Oneida Air Systems’ Customer Service Department at 1-866-387-8822 or support@oneida-air.com and we will send out an upgrade clip free of charge.

Table of Contents