Removing Lower Spray Arm Sensor - Sears Elite 665.12762K310 Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
To remove the Lower Spray Arm Sensor
(Available on models with the controlled lower spray arm.)
1. Unplug dishwasher or disconnect power.
2. Disconnect the harness from controlled lower spray arm
sensor.
3. Remove 1 Torx screw, see figure 1. (Diverter assembly
removed for open view of sensor.
4. Lift out and remove from sump, see figure 2.
Connects to Control
P11 & P13

Removing Lower Spray Arm Sensor

Remove 1 #10 Torx screw
Figure 1
Not Used
Figure 2
Controlled Spray Arm Shaft and Sensor
Kenmore Elite 2013 Stainless Steel Tall Tub Dishwasher
COMPONENT ACCESS
Controlled Spray Arm Shaft
Spray Arm Sensor Housing
Figure 3
3-25
n