Removing Electronic Control Board - Sears Elite 665.12762K310 Manual

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Remove the outer panel from the door.
3. Disconnect harness(es) from control board.
3. Lift up locking tab, see figure 1
3-8 Kenmore Elite 2013 Stainless Steel Tall Tub Dishwasher
n

Removing Electronic Control Board

Figure 1
4. Slide the electronic control to the left to unhook the tabs
on the back of the control from the slots in the door
bracket, see figures 2 and 3.
NOTE: There are two tabs on the back of the control that hook
into slots in the door bracket.
Figure 2
Tab Slots
Figure 3