Removing Sump Assembly & Drain Pump - Sears Elite 665.12762K310 Manual

COMPONENT ACCESS
Removing Sump Assembly & Drain Pump
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Release hose clamp and pull off the hose, see figures 1
and 2.
Note: Be prepared to catch the water from the sump area.
3-20 Kenmore Elite 2013 Stainless Steel Tall Tub Dishwasher
n
Figure 1
Figure 2
3. Remove the wire harness from the bracket on the side of
the sump and move off to the side, see figures 3 and 4.
4. Unplug the wire harness connected to the drain pump,
see figure 5.
Figure 3
Figure 4
Figure 5
continued next page . . .