Siqura SA-PD24 Quick Start Manual

SA-PD24
2MP Corrosion proof compact PTZ dome, 20x zoom
Quick Start Guide
Unpack
RJ45 water protection (IP66/67)
SA-PD24 Camera Unit
M8 bolts, washers and nuts
Note 1: Subject to modification. Actual product and accessories may differ in appearance.
Connector Definition
No. Connector Definition
1 Power (3-pin terminal) 12 Vdc or 24 Vac power connection
Pink Alarm Input 1
Gray Alarm Input 2
Alarm Input 3
Green
2 I/O (6-pin terminal)
Blue Alarm Input 4
Brown GND
Yellow Alarm Output
3 RJ-45 Port 10/100Mb Fast Ethernet network and PoE
4 Stereo Jack Audio Output
5 Stereo Jack Audio Input
Table 1 Connector definitions
© Siqura B.V. 2019
Version 1.0 (20191015)
SA-PD24 QSG
Find additional manuals, the datasheet,
the EU Declaration of Conformity, and
the latest firmware for this product at:
Siqura.com/downloads/software
Installation Notices
CAUTION:
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
INSTALLATION SHALL BE IN ACCCORDANCE WITH LOCAL PROCEDURES.
THE CAMERA CONTAINS BATTERIES. DISPOSE OF USED BATTERIES IN
ACCORDANCE WITH LOCAL REGULATIONS.
IF YOU USE AN EXTERNAL POWER SUPPLY, CONTACT SIQURA TO MAKE SURE
THAT THE POWER SUPPLY HAS THE PROPER POWER SPECIFICATIONS.
MAKE SURE THAT THE POWER SUPPLY COMPLIES WITH LPS REQUIREMENTS.
WHEN INSTALLING THE CAMERA, HOOK UP THE CAMERA WITH THE ANTI-DROP
CHAIN OF THE PENDANT TO THE ANTI-DROP RING (SEE FIGURE 1). FOR MORE
INFORMATION, CONTACT SIQURA.
THE CAMERA IS TO BE CONNECTED ONLY TO POE NETWORKS WITHOUT
ROUTING TO THE OUTSIDE PLANT.
Mounting
Connectors
For the connector definitions, see table 1.
Opening the housing