Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Siqura MSD620
Summary of Contents for Siqura MSD620
- Page 1 MSD620 Indoor mini IP PTZ dome with Day/Night and WDR...
- Page 2 Any brand names mentioned in this manual are registered trademarks of their respective owners. Liability Siqura accepts no liability for claims from third parties arising from improper use other than that stated in this manual. Although considerable care has been taken to ensure a correct and suitably comprehensive description of all relevant product components, this manual may nonetheless contain errors and inaccuracies.
- Page 3 Wall mounting with gooseneck tube ........... 5.3.3 Wall box mounting ................Corner mount ..................Pole mount ..................5.5.1 Pole thin/wide direct mounting ............5.5.2 Pole thin/wide box mounting ............. System integration ..................Appendix: Camera accessories ..............MSD620 Accessories ................Mounting Accessories ................Index ......................
-
Page 4: About This Manual
This manual describes how to install and connect the MSD620, Siqura's indoor IP mini PTZ Dome with Day/Night and WDR. Instructions for configuration and operation of the MSD620 can be found in the User Manual. The Technical Specifications for the MSD620 are provided in the MSD620 datasheet (download the latest version at www.siqura.com). -
Page 5: Safety And Compliance
Failure to comply with any precaution, warning, or instruction noted in the manual is in violation of the standards of design, manufacture, and intended use of the module. Siqura assumes no liability for the customer's failure to comply with any of these safety requirements. -
Page 6: Care And Maintenance
European Union (EU) to enact the Directive on the Restriction of the use of certain Hazardous Substances (RoHS) (2002/95/EC). Siqura offers products that comply with the EU’s RoHS Directive. The full version of the... -
Page 7: Cautions
Safety and compliance Product disposal The unit contains valuable materials which qualify for recycling. In the interest of protecting the natural environment, properly recycling the unit at the end of its service life is imperative. When processing the printed circuit board, dismantling the lithium battery calls for special attention. -
Page 8: Compliance
Safety and compliance Compliance... -
Page 9: Product Overview
Product overview This chapter introduces the MSD620 and its features. In This Chapter 3.1 Features........................ 9 3.2 Operation requirements..................10 3.3 Package contents....................10 3.4 Dimensions......................10 Features MSD620 ● Indoor mini IP PTZ dome ● Quad stream support: dual H.264, MPEG-2, MPEG-4, and MJPEG ●... -
Page 10: Operation Requirements
Optical cover Cable harness (30 cm) CD; manuals and software Quick Start Guide utilities Dimensions The MSD620 dimensions are 131 x 226 mm (5.2 x 8.9 in.). See the diagrams below for dimensions of the various parts of the camera. - Page 11 Product overview MSD620 side view MSD620 top view...
-
Page 12: Connect The Camera
It is necessary that the dome ID and communication protocol remain in the default modes when connecting the MSD620 to other devices. The switches used for configuring these settings are located on the bottom of the dome camera. These settings are preset to operate the camera with the IP hardware. -
Page 13: Communication Switch Configuration
Continue to hold the button for 30 seconds after powering the camera. Communication switch configuration The MSD620's communication switch is specified in the table below. The default settings are depicted in the figure. You are advised to verify the accuracy of the communication switch configuration but do not change the default settings, or some functions may not work properly. -
Page 14: Cable Requirements
If any mistake happens, contact a qualified technician. 22-pin cable harness The 22-pin cable harness of the MSD620 22-pin connector definition With the 22-pin connector, installers can simply connect the power and video cables to the dome at the same time. -
Page 15: Connect To Network
Connect the camera 22-pin connector The definitions of each pin are listed in the following table. Definition Cable Color Rating AC 24-1/DC (+) 20/18 AWG Alarm, normally closed White Photo Relay output 300 V AC 24-2/DC (-) 20/18 AWG Black Alarm, normally open White/black Photo Relay output 300 V... -
Page 16: Establish A Network Connection
The webpages of the MSD620 provide a convenient way of accessing its settings. You can log on to the internal web server of the MSD620 from a PC which is on the same subnet as the unit. Follow the steps below to open communication with the MSD620 and configure its network settings. -
Page 17: Access The Web
Step 2: Access the unit Using a standard web browser you can now log on to the web server of the MSD620. Step 3: Change the network settings of the unit The Network page enables you to make the network addressing of the unit compatible with the network it will be added to. -
Page 18: Install The Camera
Install the camera Based on the installation environment, the MSD620 camera can be installed using a ceiling, wall, corner, or pole mount. This chapter describes various installation methods and installation procedures. In This Chapter 5.1 Installation scenarios.....................18 5.2 Ceiling mount....................... 19 5.3 Wall mount...................... -
Page 19: Ceiling Mount
Install the camera Ceiling mount Generally, there are two ceiling mounting options for the MSD620 indoor dome camera: ● In-ceiling mounting ● Ceiling mounting with a straight tube 5.2.1 In-ceiling mounting The following items and tools are required to mount the dome camera into a ceiling. The supplied items are found in the dome camera package. - Page 20 Install the camera Detaching the removable wing from the Attaching the wing to the MSD620 flush mount Place the red sticker on the ceiling and cut the circle out of the ceiling. Insert the flush mount into the hole. Rotate the flush mount's wings to fix the mount at the edge of the ceiling opening and tighten their screws.
-
Page 21: Ceiling Mounting With A Straight Tube
Straight tube and other equipped items (optional accessory) ● Screws and screw anchors for fixing the straight tube onto the ceiling (not supplied) ● Indoor tube adaptor for the MSD620 (optional accessory) ● Waterproof boot (supplied with the indoor tube adaptor) Tools needed ●... -
Page 22: Wall Mount
Connect the cables to the dome camera. Then attach the dome to the tube adapter and fasten them together with the supplied screw. Wall mount There are three types of wall mounts for the MSD620 dome camera. ● Mounting with a mini wall mount, as shown in the section Mini wall mount. -
Page 23: Wall Mounting With Gooseneck Tube
Install the camera ● Screwdriver To mount the dome with the mini wall mount Make a cable entry hole in the wall to recess the cables. Otherwise, cables can be threaded through the cable entry hole on the mount. Thread the cables through the mini wall mount and out through either the cable entry hole in the wall or the hole in the mini wall mount. - Page 24 Gooseneck tube and other equipped items (optional accessory) ● Waterproof boot (standard accessory with the indoor tube adapter) ● Screws and screw anchors (not supplied) ● Indoor tube adapter for the MSD620 (optional accessory) Tools needed ● Drill ● Screwdriver To mount the dome with the gooseneck tube Make a cable entry hole in the wall to recess the cables.
-
Page 25: Wall Box Mounting
Wall box mount and other equipped items (optional accessory) ● Gooseneck tube (optional accessory) ● Screws and screw anchors (not supplied) ● Indoor tube adapter for the MSD620 (optional accessory) ● Waterproof boot (supplied with the indoor tube adapter) Tools needed ● Drill ●... -
Page 26: Corner Mount
Wall box mounting: wall box mount + gooseneck tube + waterproof boot + indoor tube adapter Corner mount With the corner standard mounting plate and gooseneck tube/mini wall mount, the MSD620 can be mounted onto the corner or a wall. Items needed ●... -
Page 27: Pole Mount
Corner wall mounting: corner standard mounting plate + gooseneck tube/ mini wall mount + indoor tube adapter + waterproof boot Pole mount There are two ways to mount the MSD620 cameras on a pole: ● Using a thin/wide direct mount as described in the section Pole thin/wide direct mounting. -
Page 28: Pole Thin/Wide Box Mounting
Install the camera ● Indoor tube adapter for the MSD620 (optional accessory) ● Waterproof boot (supplied with the indoor tube adapter) ● Pole thin direct mounting (optional accessory) ● Stainless steel straps (optional accessory) Tools needed ● Stainless strap cutter (optional accessory) ●... - Page 29 Install the camera ● Pole wide box (optional accessory) ● Stainless steel straps (optional accessory) Tools needed ● Stainless strap cutter ● Screwdriver To mount the dome camera with the pole box and gooseneck tube Fasten the pole wide box on a pole with equipped stainless steel straps. Fix the gooseneck tube to the pole box with the supplied screws and washers.
-
Page 30: System Integration
System integration The MSD620 dome camera can be integrated into other suppliers' surveillance systems in two ways: ● Via the Open Streaming Architecture (OSA) application programming interface (API). For more information, see the Siqura Programming Interface specification. This document can be downloaded from www.siqura.com. -
Page 31: Appendix: Camera Accessories
Before installing the camera, compare your accessories to those listed in this section and ensure that you have all the parts you need for your installation. Important: If anything is missing, do not install the dome. Contact your supplier for assistance. In This Chapter MSD620 Accessories....................32 Mounting Accessories....................33... -
Page 32: Msd620 Accessories
Appendix: Camera accessories MSD620 Accessories DC20C Transparent Vandal-Proof Cover or DC20S Smoke Cover Diameter: 137 mm (5.4 in.) PA02 Power Adapter (optional) ● Input: 100~115 Vac / Output: 24 Vac 72 VA (US) ● Input: 220~230 Vac / Output: 24 Vac 72... -
Page 33: Mounting Accessories
Appendix: Camera accessories CM04A/MD Flush Mount For in-ceiling installation. Height: 160 mm (6.3 in.); Diameter: 180 mm (7.1 in.); 0.5 kg (1.1 lbs) Mounting Accessories All mounting accessories are optional. To secure the camera to the tube or wall mount, all tube mounts and the mini wall mount are supplied with the following. - Page 34 Appendix: Camera accessories WM03A / Gooseneck Tube White Color; Iron, 298×385 mm (11.73×15.56 in.); 2.1 kg (4.6 lbs). (Gasket plate and cable gland for IP66 rated installations included) WM01A / Mini Wall Mount White; 184×104×115.2 mm (7.24×4.09×4.54 in.); 0.6 kg (1.2 lbs). (Gasket plate and cable gland for IP66 rated installations included) PM05 / Swan-neck Mount...
- Page 35 Appendix: Camera accessories CM01 (250 mm)/CM02 (500 mm) / Straight Tube White, Iron, Height: 250/500 mm (9.8/19.7 in.), Diameter: 50 mm (2 in.) 1 kg (2.2 lbs) / 1.8 kg (4 lbs). WM05 / Corner Standard Mounting Plate White, 222×204×117 mm (8.7×8×4.6 in.); 2 kg (4.4 lbs);...
- Page 36 Appendix: Camera accessories PM04 / Pole Wide Box White/Ivory, 270×166×155 mm (10.6×6.5×6.1 in.); 3.2 kg (7.1 lbs); Supplied with M8*16 screw×4, washer×4, spring washer×4, stainless steel straps×4. WM06 / Wall Box Mounting Ivory, 270(L)×166(W)×95(D) (10.6×6.5×3.7 in.); 2.2 kg (4.84 lbs); Supplied with M8*16 screw×4, washer×4, spring washer×4 PM01 / Pole Thin Direct Mounting...
- Page 37 Appendix: Camera accessories PM02 / Pole Wide Direct Mounting White/Ivory, 270×170×60 mm (10.6×6.7×2.4 in.); Diameter: 112~130 mm (4.4~5 in.); 1 kg (2.2 lbs); Supplied with stainless steel straps×4, M8*16 screw×4, washer×4. ST01 / Stainless Steel Straps For fixing Pole Direct Mounting/ Pole Box on the pole. Length: 700 mm (27.5 in.);...
-
Page 38: Index
Connect to network.........15 Connector and switch definition....12 Corner mount.........26 Dimensions..........10 Establish a network connection....16 Features..........9 In-ceiling mounting.........19 Install the camera........18 Installation scenarios......18 Mini wall mount........22 Mounting Accessories......33 MSD620 Accessories....... 32 Operation requirements......10 Package contents........10 Pole mount..........27...
Need help?
Do you have a question about the MSD620 and is the answer not in the manual?
Questions and answers