Table of Contents
Advertisement
Quick Links
PD1103Z2-E
3 MP Intelligent IP outdoor PTZ camera with IR
Quick Start Guide
Unpack
1
Note: Subject to modification. Actual product and accessories may differ in appearance.
Mount
6
5
4
3
2
7
6
8
7
© Siqura B.V. 2017
Version 1.1 (160407-1.1)
pd1103z2e QSG (MW10)
Find additional manuals, the datasheet,
the EU Declaration of Conformity and the
latest firmware for this product at:
http://www.tkhsecurity.com/support-files
Assemble & Fasten
2
4
3
2
3
2
Note: For mounting instructions for wall, pole, and ceiling mounts see respective manuals.
Finalise / SD card / Reset button
9
10
6
65
5
43
4
2
3
2
Remove transport tape and protection foil.
13
12*
10
65
43
2
*Micro SD Card: µSDHC or µSDXC ≤128GB
**Reset button: Press and hold for 10 sec. when powering on or rebooting.
Warning: Restores factory-default settings, including IP address, user name and password!
11
DHCP:
10
65
43
2
14**
IP = 10.x.y.z
Connect
5
4
3
2
Use DHCP server
IP = 10.x.y.z
Network s wit ch
IP = 10.x.y.z
DHCP
http://www.tkhsecurity.com
http://www.tkhsecurity-usa.com
Advertisement
Table of Contents
Related Manuals for Siqura PD1103Z2-E
Summary of Contents for Siqura PD1103Z2-E
- Page 1 *Micro SD Card: µSDHC or µSDXC ≤128GB DHCP **Reset button: Press and hold for 10 sec. when powering on or rebooting. Warning: Restores factory-default settings, including IP address, user name and password! http://www.tkhsecurity.com © Siqura B.V. 2017 Version 1.1 (160407-1.1) http://www.tkhsecurity-usa.com pd1103z2e QSG (MW10)
- Page 2 Use fixed IP address Install Device Manager (optional) Change IP address via Device Manager DHCP: IP = 192.168.1.x Network s wit ch 30 s IP = 192.168.1.x 2 ~ 253 DHCP Important: 1103 series cameras require Device Manager version 1.8.1 or later. Note: Use Device Manager (see next) to discover the camera on the network.
Need help?
Do you have a question about the PD1103Z2-E and is the answer not in the manual?
Questions and answers