Torque Setting; Changing Attachments; Switching On/Off; Cleaning And Maintenance - Parkside PHSSA 12-Li A1 Translation Of The Original Instructions

Torque setting

The torque can be adjusted continuously
by pressing the on / off switch (
The greater the pressure on the on / off
switch, the greater the torque.
It can take up to 30 seconds to
reach the maximum torque of 300
Nm for loosening (left rotation). The
progress of this process is indicated
by the drive direction LEDs (
Reaching the maximum torque is
accompanied by an audible rasp-
ing sound.
This noise is caused by the slip
clutch.

Changing attachments

1. Attach a suitable socket (9) onto the
chuck (1).
2. To remove the socket (9), pull it off
the chuck (1).

Switching on/off

1. Press the on/off switch (7) to
start the device. The LED work
light (8) lights up during opera-
tion.
2. To turn it off, release the on/off
switch (7).
Cleaning and

maintenance

Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
7).
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
4b).
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or sol-
vents. You may otherwise irreparably
damage the appliance.
Maintenance
The appliance cleaner is maintenance free.

Storage

• Store the equipment in a dry place well
out of reach of children.
• Store the equipment between 10° C and
40° C. During storage, avoid extreme
cold or heat so the battery does not lose
power.
• Remove the battery before storing the
unit for longer periods of time.
• During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
GB IE
27