Dimensions And Connections; Installation - Beretta BV Series Instructions For The Installer

4 DIMENSIONS AND
CONNECTIONS
1 Off switch
2 Summer / Winter (E/I) selector switch
3 Thermometer
4 Thermostat
5

INSTALLATION

- Remove the cover (C) by unscrewing the
relevant fixing screws (it does not need to be
fitted again).
- Form the electrical connections as
described in the "electrical connections"
chapter.
- Insert the bulb on the thermostat (TRB) in
the sensor housing (PS) making it rest on
the bottom.
- Insert the bulb on the thermometer (TB) in
the sensor housing (PS) making it rest on
the bottom.
- Unscrew the three screws (V), position the
control panel correctly, and tighten it.
V
PS
TRB
V
1 2 3 4
0
C°
380
C
TB