Page 1
SSW-520-F-ISSUE4.0 SERVICE MANUAL MODEL SSW-520-F HANDS FREE STAINLESS STEEL TELEPHONE EQUIPPED WITH LOW POWER SPEAKER BOARD Serving the Telephone Industry Since 1930 Communication Equipment 519 West South Park Street & Engineering Company Okeechobee, FL. 34972 Voice: 863-357-0798 Fax: 863-357-0006...
Page 2
ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL SSW-520-F STAINLESS STEEL HANDS FREE WALL TELEPHONE. SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
(863) 357-0006 (FAX) GENERAL The CEECO Hands free telephone is a sturdy, vandal resistant, Stainless Steel Panel Speakerphone. Instead of a hookswitch and handset, the telephone has a Press to start/Press to stop button for initiation and termination of phone calls.
Page 4
Position 3 (for THREE minute conversation time) Position 5 (for FIVE minute conversation time) If the time out disconnect feature is not desired, simply place the blue mini-jumper at P.C. board location JP3 in the “OFF” position. CEECO Communication Equipment & Engineering Company PROPRIETARY...
RECOMMENDED TOOLS AND TEST EQUIPMENT Volt/Ohm Meter Security Tool, CEECO part number 301-037 Flat Blade Screw Driver *****WARNING***** Never install telephone wiring during a lightning storm.
(refer to diagram on next page). Dress the lines/cables away from the security screw. Install the cover assembly by placing the two tabs into the two corresponding slots and secure the cover assembly by tightening the security screw. TELEPHONE LINE WIRING DIAGRAM CEECO Communication Equipment & Engineering Company PROPRIETARY...
PROGRAMMING : Via DTMF keypad. DIMENSIONS : 5"W X 10"H X 3 1/2"D MOUNTING : Vertical surface mount MEMORY RETENTION : Non-volatile memory retention WEIGHT : Approximately 6 Pounds TYPE JACK : RJ11C CEECO Communication Equipment & Engineering Company PROPRIETARY...
(863) 357-0798 (863) 357-0006 (FAX) 10.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs for both directions. 10.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturer’s list price.
PRINTED CIRCUIT BOARDS Printed circuit boards should not be field repaired. If a unit is found to be faulty, replace it with another unit and return the faulty unit to CEECO for repair. Modifications by anyone other than CEECO will void the warranty.
Need help?
Do you have a question about the SSW-520-F and is the answer not in the manual?
Questions and answers