Configuration Menus Layout; General Security And Configuration Steps - ADDER AdderView CATx 1000 User Manual

Configuration menus layout

The menu options are arranged as shown here:
Configuration Menu Functions
User Preferences
Global Preferences
Setup Options
Edit Computer List
Edit User List
Edit Autoscan List
(F1) Advanced Options
For a description of each option within the Configuration menus, see
Appendix 1
for more details.
Restore Standard Mouse
Restore Intellimouse
Power Control
Clear UTP Extender Password
Reset to Factory Defaults
Send Data to RS232 port
Read Data from RS232 port
OSD Colour
Reminder Banner
Reminder Colour
Screen Saver Type
Confirmation Box
Mouse Switching
Screen Saver
Autoscan Mode
Autoscan Period
OSD Dwell Time
User Timeout
Security
Language
Hotkeys
Automatic Logout
Audio
Add Computers
DDC Options
Power Control
USB Country Code

General security and configuration steps

To enable general security
Configuration menu.
1 Display the
2 Highlight 'Setup Options' and press
3 Highlight 'Security' and press
4 Now create a new password for the ADMIN user account.
To set an ADMIN password
1 Display the Configuration menu.
2 Highlight 'Edit User List' and press
3 Highlight 'ADMIN' and press
name 'ADMIN' without change.
4 Enter an appropriate password for the ADMIN user account
with regard to the following:
• The password can be up to 12 characters long.
• The password can use letters, numerals and/or certain
punctuation marks.
• The password is not case sensitive.
5 Press . The 'Edit Access Rights' menu will be displayed.
However, as the ADMIN account always has access to all
computers, press again to save the new password.
What to do if the ADMIN password has been
To change the hotkeys
AdderView CATx 1000 units use
hotkeys. These can be changed if they clash with other software or
hardware within the installation.
Configuration menu.
1 Display the
2 Highlight 'Setup Options' and press
3 Highlight 'Hotkeys' and press
hotkey combination. The options are: CRTL+ALT, CTRL+SHIFT,
ALT+SHIFT, ALT GR, LEFT ALT+RIGHT ALT, LEFT CTRL+LEFT ALT
or RIGHT CTRL+RIGHT ALT.
4 Press to return to the 'Configuration Menu'.
.
to select 'ENABLED'.
.
. Press again to accept the
forgotten.
and as their standard
.
to select the required
0