Table of Contents
Advertisement
Configuration
Configuration menus
The configuration menus allow you to determine numerous aspects of the
AdderView PRO capabilities.
To access the configuration menu
1 If the main menu is not already displayed, press and hold
then press
using a keyboard attached to the keyboard USB port of the
AdderView PRO user console.
The selection menu will be displayed:
ADDERVIEW PRO
Computer
Computer 01
Computer 02
Default names for
each computer
Computer 03
channel
Computer 04
Computer 05
Computer 06
Computer 07
Computer 08
Switching Mode
KVM
F1–More menus
Switching
mode bar
F3–Find
Esc–Quit
2 Press
To display the Configuration Menu:
ADDERVIEW PRO
Configuration Menu
Functions
Global Preferences
Setup Options
Edit Computer List
EDID Options
Enter–Select
Esc–Quit
Firmware version: 1.06.02
3 Use the
and
keys to highlight an option, then press
and
Switching icons show
which peripherals are,
Port
or will be, connected
01
1
2
to which computer(s)
02
03
Coloured dots indicate
the status of the
04
connected computers:
05
Red: computer off
06
Green: computer on
Black: computer sleeping
07
08
Channel numbers
SPK
1
2
Tab–Cycle Mode
F4–Lock
to select.
Hotkeys
Note:
and
are the standard hotkeys and can be
avoid clashes with other devices or software. If you change the hotkeys,
remember to use the new ones in place of
the instructions in this guide.
Note: You can also display the main menu by pressing the COMPUTER
button for five seconds.
Configuration menus layout
The menu options are arranged as shown here:
Configuration Menu
Functions
Global Preferences
Setup Options
Edit Computer List
EDID Options
For a description of each option within the Configuration menus, see
Appendix 1
for more details.
altered
to
and
when following
Reset to Factory Defaults
Mouse Switching
OSD Colour
Default Mode
Reminder Banner
Autoscan Mode
Autoscan Period
OSD Dwell Time
Security
Language
Hotkeys
Default Channel
Baud Rate
EDID Source
EDID Refresh
Advertisement
Table of Contents
Need help?
Do you have a question about the AdderView Pro AV8PRO-DVI and is the answer not in the manual?
Questions and answers