Configuration Menus - ADDER AdderView CATx 1000 User Manual

Configuration menus

The configuration menus allow you to determine many aspects of the
AdderView CATx 1000 capabilities. From here you can:
• Create individual user accounts and determine access rights,
• Provide names for all connected computers to allow quick recognition,
• Set individual and global settings for users,
• Run various functions, such as mouse restore operation,
• Save and load AdderView CATx 1000 configuration settings, and more.
To access the configuration menu
1 If the main menu is not already displayed, press and hold
press using a keyboard attached to a AdderView CATx 1000 user port.
The main menu will be displayed:
ADDERVIEW CATx 1000
Computer
Computer 1
Computer 2
Default names for
Computer 3
each computer port
Computer 4
Computer 5
Computer 6
Computer 7
Computer 8
User
ADMIN
Your Login name
F1-More menus
Esc-Quit
2 Press To display the Configuration Menu:
ADDERVIEW CATx 1000
Configuration Menu
Functions
User Preferences
Global Preferences
Setup Options
Edit Computer List
Edit User List
Edit Autoscan List
F1-More menus
Enter-Select
Esc-Quit
Firmware Version 1.01b06
3 Use the and keys to highlight an option, then press
and then
Availability of each
Port
computer:
Green - available
01
Red - unavailable
02
03
Port numbers
04
05
06
07
08
Connection status
Status
SHARED USE
F3-Find
Assistance for
F4-Logout keypress options
to select.
Hotkeys
Note: and are the standard hotkeys and can be
avoid clashes with other devices or software. If you change the hotkeys,
remember to use the new ones in place of
the instructions in this guide.
Security
Note: If the security option has been
enabled, you will be asked for a valid
user name and password before the
main menu can be displayed.
IMPORTANT: When supplied, AdderView CATx 1000 units have
their security features disabled, which means that any attached
users have access to all connected computers and all AdderView
CATx 1000 settings. You are strongly recommended to
the 'Security' feature and set an access password for the ADMIN
account.
altered to
and when following
ADDERVIEW CATx 1000
User Name:
Password:
Esc-Scr Save
enable