GGP ITALY SPA 63 Operator's Manual page 53

CONTROLS AND INSTRUMENTS
➤
In the electric start models
4.11 K
EY IGNITION SWITCH
This key operated control has three
positions:
«OFF» everything is
switched off;
«ON» activates all parts;
«START» engages the
starter motor.
On being released at the «START»
position, the key will automatically
return to «ON».
4.12 A
CCELERATOR LEVEL
Regulates the engine's r.p.m. The positions are indicated on a plate showing
the following symbols:
«CHOKE»
«SLOW»
«FAST»
– The «CHOKE» position enriches the mixture so must only be used for the
time necessary when starting from cold.
– When moving from one area to another, put the lever in a position between
«SLOW» and «FAST».
– When cutting, go to the «FAST» position.
➤
In the manual start models
4.21 P
ULL START HANDLE
To start the engine, take the starter cable handle and give it a firm tug.
starting from cold
for minimum engine speed
for maximum engine speed
EN 13
4.11
4.12