GGP ITALY SPA 63 Operator's Manual page 49

UNPACKING AND ASSEMBLY
3.3 FITTING THE SEAT
1. Fit the seat (1) onto the plate (2) using the
screws (3).
3.4 FITTING THE BLADE ENGAGEMENT
LEVER
1. Fit the end of the lever (1) on the projecting
part of the pin (2) and fix it all by tightening
the screw (3) and nut (4).
3.5 CONNECTING THE BATTERY (
1. Position the battery (1) in its compart-
ment under the seat;
2. connect the battery connector (2) to the
machine connector (3);
3. fit the spring (4) to hold the battery in
place;
4. recharge the battery by following the
instructions in the manual (☛ 6.2.5).
IMPORTANT
WARNING!
!
ing safe handling and disposal.
➤
Never start the engine until the battery is fully charged!
Follow the battery manufacturer's instructions regard-
3
3
1
4
3
sonly in the electric start models):
2
2
4
2
EN 9
1
1
3