Key Points; Step 6: Commission The Device - Emerson E2 Quick Start Manual

quick start guide
E2 Setup with Veeder-Root TLS-350 MODBUS Device for 527-0370

KEY POINTS:

• The FieldServer FS-B2510 is a Gateway Protocol Translator that enables data transfer
between the E2 controller and the Veeder-Root TLS-350.
• RS485 Network Cable used -> (BELDEN 8641-24 AWG 2 Conductor Shielded Cable) or
equivalent.

STEP 6: Commission the device.


12. Press
13. Press F4 (COMMISSION) and select the MODBUS port that you will be assigning the
device to and then select the MODBUS device address.
Document Part # 026-4922 Rev 0 29-JUN-2012
©2012 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
Figure 5 - Adding the Device to the E2 Controller

, (System Configuration),
 
(Network Setup), (Network Summary).
Page 5 of 8