Install fasteners kit
Cabinet depth
alignment gauge
(4)
Tools
Cross-head screwdriver
POSITION AND ALIGNMENT IN CABINETRY
A
B
C
Attaching the depth alignment gauges
1 Loosen the right and left screws at the top and bottom
sides of the door. (A)
2 Locate the alignment gauges at correct orientation to the
right and left screws.
Right
Left
3 Position the alignment gauge by inserting the screw head
through the keyhole of the gauge. (B)
4 Push the alignment gauge down to lock the screw position
in the keyhole. (C)
5 Tighten the screw just enough to firmly hold the gauge.
The alignment gauges are only temporary and must be
removed after installation.
41