Fisher & Paykel RS2484WR Installation Manual page 37

Anti-tip bracket
assembly kit
Anti-tip bracket
(1)
Masonry plug
(4)
#10x40 cross-head screw
(4)
Tools
Cross-head screwdriver
Powered drill
Pencil
INSTALL ANTI-TIP BRACKET
For plaster board wall
Fix the anti-tip bracket to the
wall with #10x40mm cross head
screws, and screw tightly with a
screwdriver.
screws
masonry plugs
For solid wall installation
Hammer 10x30mm masonry plugs
into wall until flush. Fix bracket to
wall with #10x40mm cross head
screws, and screw tightly.
min 7 1/16" (180mm)
Bracket
Appliance Wall
PROFILE VIEW
min 7 1/16" (180mm)
Bracket
Spacer
Appliance
Wall
PROFILE VIEW
Roll the appliance slowly into
the cabinetry until the anti-tip
bracket overlaps the back edge
of the appliance.
Ensure the bracket overlaps
the appliance by a minimum
7 1/16" (180mm) for a secure
hold.
If minimum 7 1/16" (180mm)
overlap cannot be achieved,
install a solid spacer to the wall
stud behind the bracket.
Be careful not to run over
the power cord when rolling
in the appliance.
37