Fisher & Paykel RS2484WR Installation Manual page 61

Install fasteners
kit
8Gx16 Countersunk
screw (6)
Front foot
adjustment
screw
Tools
Cross-head
screwdriver
Powered driver
(optional)
Ruler
Front foot
ruler
DUAL INSTALLATION
Adjusting the height of first
appliance in cabinetry
1 Turn the front and rear
adjustment screws clockwise
Rear foot
to raise height of the appliance
adjustment
screw
and counter-clockwise to
Foot lower the height.
2 Turn the front and rear
adjustment screws clockwise to
extend the feet until it engages
the floor, and the top bracket
reaches ceiling of the alcove.
Rear foot
3 Check the alignment gauges
while adjusting the screws
to maintain the alignment
of the appliance.
4 Using a ruler, check if the
gaps between appliance and
cabinetry side wall are even.
A b
A b
c
D
c d
Securing first appliance in
cabinetry
1 Fix the left and right top
brackets (A, B) to the ceiling
surface of the cabinetry with
8Gx16 countersunk screws.
2 Fix the left and right lower
side brackets (C, D) to the
cabinetry side surface with
8Gx16 countersunk screws.
61