Install fasteners kit
Cabinet depth alignment
gauges (4)
Barbed plugs
(2)
Tools
Cross-head screwdriver
Powered driver (optional)
DUAL INSTALLATION
b
C
Attaching the depth alignment gauges
1 Loosen the screws (A) at the cabinetry sides of the door
and drawer of each appliance.
2 Locate the alignment gauges (B) at correct orientation to
the right and left side screws.
A
Left
3 Position the alignment gauge by inserting the screw head
through the keyhole of the gauge.
4 Push the alignment gauge down to lock the screw position
in the keyhole.
5 Tighten the screw just enough to firmly hold the gauge.
The alignment gauges are only temporary and must be
removed after installation.
Attaching the barbed plugs
1 Before rolling into the cavity, insert barbed plugs
(C) into large holes on the top right and left sides of
both appliances.
2 The plugs protect the inside surface of cabinetry from
being damaged by screws when pushing in the appliance.
Right
59