Saeco AULIKA EVO TOP HSC Operation And Maintenance page 49

MENU ITEM
Prebrewing
Off
Low
High
COFFEE TEMPERATURE
Low
Normal
High
COFFEE LENGTH
MILK QUANTITY
Pause
High Speed Milk
Off
On
Default
Latte Macchiato
Prebrewing
Off
Low
High
COFFEE TEMPERATURE
Low
Normal
High
COFFEE LENGTH
Description
Pre-brewing:
coffee is slightly dampened before brewing so as to bring out the full aroma of the coffee
that acquires an excellent taste.
pre-brewing is not performed.
active.
longer in order to bring out the coffee taste.
This section allows the coffee brewing temperature to be adjusted
lowest brewing temperature
standard brewing temperature
highest brewing temperature
This section allows you to program the amount of coffee to be brewed for each selected
beverage.
The bar allows you to set the exact amount of coffee to be brewed (the value is
measured in turbine pulses).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
This setting can only be adjusted for beverages containing milk and allows you to
program the amount of milk dispensed for each selected beverage.
The bar allows you to set the exact amount of milk to be dispensed (the value is
measured in seconds).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
This value between 0 and 60 secs - if different from zero - performs a pause of the value set in seconds to
stratify the milk before brewing the coffee.
This setting can only be adjusted for beverages containing milk and allows the machine to dispense milk and
coffee at the same time.
Milk and coffee are dispensed in two separate steps.
NOTE:
in this case, the various dispensing stages (coffee or milk) can be individually stopped.
Milk and coffee are dispensed at the same time.
NOTE:
in this case, the user can only stop dispensing the beverage as a whole.
Setting ECOMODE to OFF brings down the dispensing time of mixed products.
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
To manage the Latte Macchiato beverage brewing parameters.
Pre-brewing:
coffee is slightly dampened before brewing so as to bring out the full aroma of the coffee
that acquires an excellent taste.
pre-brewing is not performed.
active.
longer in order to bring out the coffee taste.
This section allows the coffee brewing temperature to be adjusted
lowest brewing temperature
standard brewing temperature
highest brewing temperature
This section allows you to program the amount of coffee to be brewed for each selected
beverage.
The bar allows you to set the exact amount of coffee to be brewed (the value is
measured in turbine pulses).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
US English
49