Saeco AULIKA EVO TOP HSC Operation And Maintenance page 48

US English
MENU ITEM
EXTRA
LARGE COFFEE
CAFFE LATTE
CONFIG. WITH PARAMETERS
Espresso
Prebrewing
Off
Low
High
COFFEE TEMPERATURE
Low
Normal
High
COFFEE LENGTH
Default
Coffee
Prebrewing
Off
Low
High
COFFEE TEMPERATURE
Low
Normal
High
COFFEE LENGTH
Default
Cappuccino
48
Description
This menu allows you to save Extra beverages in beverage mode
A Large Coffee will be brewed once the length of the beverage has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG. WITH
PARAMETERS" menu
A Caffe Latte will be brewed once the length of the coffee part and milk part has been saved
NOTE:
the length of the beverage may be numerically adjusted using the "CONFIG. WITH
PARAMETERS" menu
This menu allows you to change the characteristic configuration parameters of each beverage
To manage the Espresso beverage brewing parameters.
Pre-brewing:
the coffee is slightly dampened before brewing so as to bring out the full aroma of the
coffee and to acquire an excellent flavour
pre-brewing is not performed.
active.
longer in order to bring out the coffee taste.
This section allows the coffee brewing temperature to be adjusted
lowest brewing temperature
standard brewing temperature
highest brewing temperature
This section allows you to program the amount of coffee to be brewed for each selected
beverage.
The bar allows you to set the exact amount of coffee to be brewed (the value is
measured in turbine pulses).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
To manage the Coffee beverage brewing parameters.
Pre-brewing:
coffee is slightly dampened before brewing so as to bring out the full aroma of the coffee
that acquires an excellent taste.
pre-brewing is not performed.
active.
longer in order to bring out the coffee taste.
This section allows the coffee brewing temperature to be adjusted
lowest brewing temperature
standard brewing temperature
highest brewing temperature
This section allows you to program the amount of coffee to be brewed for each selected
beverage.
The bar allows you to set the exact amount of coffee to be brewed (the value is
measured in turbine pulses).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
To manage the Cappuccino beverage brewing parameters.