Firearm - Omegasonics RESTORATION PRO Operation & Instruction Manual

Firearms
· In the ultrasonic bath, preheat 1 part OmegaBlue with 32 parts clean water to a
temperature of 115˚F.
· Disassemble the firearm into its major components. If it is equipped with a scope, it
can be left attached.
· Spray the components with a spray bottle containing 1 part OmegaBlue, 21 parts
clean water solution. Let sit for 1 – 3 minutes.
· Rinse off the residue loosened by the solution.
· If the stock is synthetic, it can be cleaned with the other metal parts. If it is wooden,
use a basket to submerge it into the bath and clean for 1 -2 minutes.
· Using a basket, submerge the components into the bath and clean for 1 – 5 minutes,
until all residues are removed.
· You may spot clean using the spray bottle solution and a 3M pad that is green or
light in color.
· Rinse all components with de-ionized water that is 115 - 120˚F.
· Blow off excess moisture with compressed air and dry using a hand-held hot air
dryer.
· Lubricate using light gun oil or silicone spray.
· Test using industry standards.
18