Energetics ST 880 Manual page 6

Assembly Instructions
Step 1
A
step-1
Assemble the supporting bracket for sliding beam (5) to the main frame (22) by the screw (80), the spring
washer (86) and the flat washer (81).
Step 2
1) Assemble the seat support (25) with the seat (24) to the sliding beam (19) shown as fig. a.
2) Assemble the bolt (85) and the buffer (61) to the sliding beam (19) shown as fig. b.
3) Assemble the back cover (12) with the supporting bracket for back cover (13) to the sliding beam (19) by
the bolt (87), the spring washer (74) and the flat washer (76) shown as fig. c.
4) Assemble the sliding beam (19) to the main frame (22) by the screw cap (92), the bolt (84), the flat washer
(78) and the Nylon nut (79).
5) Put the sliding beam forward shown as the arrow and turn the ball knob (17) clockwise in order to tight
the sliding beam.
A
A
M6*30 D10.5 D13
6
x2