Changing The Antenna; Other Notable Items; Initialising And Using The Device; The Ultrapoint Software - ULTRACOM AVIUS Manual

Please take note of the (+) and (-) symbols on the battery when you
are inserting it into the device or charger.
Before you begin using the device, charge the batteries that will
be used in the collar and the host device. The batteries do not need
to be removed from the device after every use. However, it is
recommended that the batteries be removed for long periods of
storage.

3.2 Changing the antenna

You can change the antenna on the Avius host device by yourself.
Turn the antenna anticlockwise by hand. Fix the new antenna by
rotating it clockwise into the connector. Do not overtighten the
antenna! (Figure A)

3.3 Other notable items

The signal quality between the collar and the host device may be
impacted by natural obstructions or buildings. The signal is
strongest when there is an unobstructed line of sight. You can
improve the signal by moving the collar to a more elevated area.

4. Initialising and using the device

4.1 Ultrapoint software
You will need the Ultrapoint software to use the device. Install the
Ultrapoint software from the app store on your mobile device. Refer
to the user manual for the Ultrapoint software for a list of
compatible operating systems and installation instructions.
You can find the full software manual from our website
www.ultracom.fi/en

4.2 Installing the batteries

Remove the covers of the battery compartments by turning the
cover anticlockwise. Insert a single 3.7 V 18650-sized Li-Ion battery
into the battery compartment of the host device. Take note of the
(+) and (-) symbols on the battery and the battery compartment.
(Figure B)
Close the cover of the battery compartment by carefully twisting
it shut.
Do not overtighten the cover!
33
ENG