Internal Factory Wiring - Riello F3 Installation, Use And Maintenance Instructions

GB

INTERNAL FACTORY WIRING

WITH AN ELECTRONIC AIR SHUTTER INTERNAL FACTORY WIRING
PUMP VALVE
(COIL)
MOTOR
CAPACITOR
Key to lay-out:
A - Brown
B - White
C - Blue
D - Black
ATTENTION !!
Do not swap neutral and phase over, follow the diagram shown carefully and carry out a good earth

connection.
Minimum wire size AWG 18.

All wiring must be done in accordance with existing codes, both national and local.

RIELLO 40 F3 - F5 SERIES OIL BURNERS EQUIPPED
D7328
6 - 120V source activates shutter open
11 - motor lead 120V source
- 120V control lock out alarm terminal
AUX - costant 120V auxiliary terminal - electronic air shutter
6
2903223